ServiceTree provides Onida Washing Machine Mechanic in Ekkaduthangal, nearby locations and all over Chennai, Our washing machine technician service all kind of Washing Machine models, our service available in Ekkaduthangal, We service Onida and all washing machine brands Book Now, our customer service people respond you in 3 – 5 minutes
We do service all types of washing machines like front-load, top-load, automatic and semi-automatic washing machine.
Washing Machine Common Issues
In your Onida Washing Machine you might face any one of the following problems, any service or repair reach us.
If a washer won’t begin its cycle or isn’t spinning properly, you may have merely overlade it or didn't shut the door fully. Attempt taking some things that will help balance the load and reclosing the door firmly, then beginning it once more.
Laundry machines collect mould and mildew which will transfer odors to your garments. To urge eliminate the stink; wipe out the door seals, and soap and material chemical seals. Then run a cycle hot with bleach or a billboard washer cleaner.
Clogged Drain Hose
Once the machine won’t drain, close up the water. Feeling ambitious? Disengage the drain hosepipe and clean out every blockage. If you discover water within the waste pipe, rigorously plan down the pipe to disengage it then reattach. Consult owner’s manual for any directions.
If the washer itself leaks, it might mean the bathtub seal or bearing kit is in problem. It would be time to require replacing the machine.
This probably indicates that the pressure switch or water valve must get replaced.
A puddle on the ground might mean a leaky hose. Initially confirm all the connections are comfortable. If the leak continues from the coupling or drain pump, decision a service man to gauge the matter.
Low Flow this might be caused by a clogged filter or a kink within the provide hose, which may be fastened by adjusting the machine therefore the hose is straight. If issues continue, it might mean a wrong water management or water price, each of that should be handled by a technician.
This might be a drag with the lid switch, motor coupling, drive belt, or alternative mechanics – all of that need disassembly from a part of the machine and may be expensive to repair.